Product/Service

LCD Color Analyzer

Source: Konica Minolta Sensing Americas, Inc.
The CA-210 LCD Color Analyzer is Konica Minolta's "next generation" color analyzer designed to measure color luminance, gamma characteristic and flicker on various types of Flat Panel Displays including LCD and EL. Faster than previous generation analyzers, the CA-210's measurement of luminance and chromaticity at up to 20 times/second makes it ideal in high production environments. (AND it can simultaneously measure up to five points on the screen. ) The CA-210's special optical design limits acceptance angle to within ± 2.5 degrees, thus eliminating the influence of the LCD's viewing angle dependency. Matrix calibration allows for high measurement of LCD displays that provide colors through additive mixing of three monochrome colors (R,G,B). A new low luminance capability enables measurements as low as 0.1cd/m2 In USA, toll free: 888-473-2656 Outside USA: 201-574-4118 FAX: 201-574-4201 For South America, Latin America and the Caribbean please email colorinfoLA@ph.konicaminolta.us
Applications:
  • Flicker Measurements, Gamma Adjustments on production line
  • White Balance, chromaticity adjustment, inspection on Flat Panel Display(FPD) production lines
  • Quality control and shipping inspection by FPD manufacturers
  • Receiving inspection of FPDs by manufacturers and resellers

Features:

  • High speed measurement of luminance and chromaticity (maximum 20 times/second)
  • Measures luminance as low as 0.1cd/m2
  • Ideal for measuring gamma characteristic and adjustment
  • Up to 5 probes for multi-point measurements
  • Accuracy of ±0.002 for white and ±0.004 for R, G,B
  • CIE 1931 Standard Observer XYZ filter
  • Short measuring distance of 30 ±10mm
  • Special optical design limits acceptance angle within ±2.5 degrees, eliminating influence of viewing angle dependency
  • 4-digit LCD display for chromaticity (more precise data readings)
  • Small, lightweight (4.1kg)
  • USB interface for easy connection to computer
  • Matrix calibration: white and R,G,B
  • LED for easy positioning of the sensor
  • SDK (Software Development Kit) - Standard with all CA-210 Color Analyzers
  • Enables user programming (Visual Basic or Visual)

Example: Software controls CA-100Plus and Pattern Generator to capture color and chromaticity data with each output level. After calculating correction factor of gamma curve, software will write the look up table of coefficient to monitor firmware.

In USA, toll free: 888-473-2656 Outside USA: 201-236-4300 FAX: 201-785-2480 For South America, Latin America and the Caribbean please email amunoz@se.konicaminolta.us